for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 190 hmc593lp3 / 593lp3e gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz v03.0309 general description features functional diagram the hmc593lp3(e) is a versatile, high dynamic range gaas mmic low noise amplifi er that integrates a low loss lna bypass mode on the ic. the amplifi er is ideal for wibro & wimax receivers operating between 3.3 and 3.8 ghz and provides 1.2 db noise fi gure, 19 db of gain and +29 dbm ip3 from a single supply of +5v @ 40ma. input and output return losses are 23 and 13 db respectively with no external matching components required. a single control line (0/vdd) is used to switch between lna mode and a low 2 db loss bypass mode reducing the current consumption to 10 a. noise figure: 1.2 db output ip3: +29 dbm gain: 19 db low loss lna bypass path single supply: +3v or +5v 50 ohm matched output electrical specifi cations, t a = +25 c typical applications the hmc593lp3(e) is ideal for: ? wireless infrastructure ? fixed wireless ? wimax wibro / 4g ? tower mounted amplifi ers parameter vdd = +3v vdd = +5v lna mode bypass mode lna mode bypass mode units min. typ. max. min. typ. max. min. typ. max. min. typ. max. frequency range 3.3 - 3.8 ghz gain 14 17 -3 -2 16 19 -3 -2 db gain variation over temperature 0.011 0.002 0.011 0.002 db / c noise figure 1.4 1.8 1.2 1.6 db input return loss 23 30 23 30 db output return loss 12 25 13 25 db reverse isolation 39 36 db power for 1db compression (p1db)* 10 13 30 13 16 30 dbm saturated output power (psat) 13.5 17 dbm third order intercept (ip3)* (-20 dbm input power per tone, 1 mhz tone spacing) 22 29 dbm supply current (idd) 20 25 0.01 40 50 0.01 ma switching speed lna mode to bypass mode 428 428 ns bypass mode to lna mode 343 343 ns * p1db and ip3 for lna mode are referenced to rfout while p1db for bypass mode is referenced to rfin.
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 191 hmc593lp3 / 593lp3e v03.0309 gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz lna broadband gain & return loss @ vdd= 3v lna broadband gain & return loss @ vdd= 5v lna gain vs. temperature lna gain vs. vdd lna noise figure vs. temperature lna noise figure vs. vdd -40 -30 -20 -10 0 10 20 30 2.0 2.5 3.0 3.5 4.0 4.5 5.0 s21 s11 s22 response (db) frequency (ghz) 14 15 16 17 18 19 20 21 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c gain (db) frequency (ghz) vdd = 5v vdd = 3v 12 13 14 15 16 17 18 19 20 3.3 3.4 3.5 3.6 3.7 3.8 +2.4v +2.7v +3.0v +4.5v +5.0v +5.5v gain (db) frequency (ghz) 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 3.3 3.4 3.5 3.6 3.7 3.8 2.4v 2.7v 3.0v 4.5v 5.0v 5.5v noise figure (db) frequency (ghz) 0 0.5 1 1.5 2 2.5 3.3 3.4 3.5 3.6 3.7 3.8 vdd=3v vdd=5v noise figure (db) frequency (ghz) t=+85c t=+25c t=-40c -40 -30 -20 -10 0 10 20 30 2.0 2.5 3.0 3.5 4.0 4.5 5.0 s21 s11 s22 response (db) frequency (ghz)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 192 lna output ip3 vs. temperature lna input return loss vs. temperature @ vdd= 3v lna input return loss vs. temperature @ vdd= 5v lna output ip3 vs. vdd lna output return loss vs. temperature @ vdd= 3v lna output return loss vs. temperature @ vdd= 5v 10 14 18 22 26 30 34 3.3 3.4 3.5 3.6 3.7 3.8 2.4v 2.7v 3.0v 4.5v 5.0v 5.5v ip3 (dbm) frequency (ghz) 16 18 20 22 24 26 28 30 32 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c ip3 (dbm) frequency (ghz) vdd = 5v vdd = 3v -25 -20 -15 -10 -5 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c return loss (db) frequency (ghz) -40 -30 -20 -10 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c return loss (db) frequency (ghz) -40 -30 -20 -10 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c return loss (db) frequency (ghz) hmc593lp3 / 593lp3e v03.0309 gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 193 lna psat vs. temperature lna psat vs. vdd lna output p1db vs. temperature lna output p1db vs. vdd lna reverse isolation vs. temperature -45 -40 -35 -30 -25 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c isolation (db) frequency (ghz) vdd = 3v vdd = 5v 10 12 14 16 18 20 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c p1db (dbm) frequency (ghz) vdd = 5v vdd = 3v 6 8 10 12 14 16 18 20 3.3 3.4 3.5 3.6 3.7 3.8 2.4v 2.7v 3.0v 4.5v 5.0v 5.5v p1db (dbm) frequency (ghz) 10 12 14 16 18 20 22 3.3 3.4 3.5 3.6 3.7 3.8 2.4v 2.7v 3.0v 4.5v 5.0v 5.5v psat (dbm) frequency (ghz) 10 12 14 16 18 20 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c psat (dbm) frequency (ghz) vdd = 5v vdd = 3v hmc593lp3 / 593lp3e v03.0309 gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 194 bypass mode broadband gain & return loss [1] bypass mode broadband gain & return loss [2] [1] vdd = 3v [2] vdd = 5v bypass mode insertion loss vs. temperature [1] bypass mode insertion loss vs. temperature [2] -25 -20 -15 -10 -5 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 s21 s11 s22 response (db) frequency (ghz) -5 -4 -3 -2 -1 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c insertion loss (db) frequency (ghz) -5 -4 -3 -2 -1 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c insertion loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 s21 s11 s22 response (db) frequency (ghz) hmc593lp3 / 593lp3e v03.0309 gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz bypass mode, input ip3 vs. temperature bypass mode, p1db vs. temperature -5 -4 -3 -2 -1 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c insertion loss (db) frequency (ghz) -5 -4 -3 -2 -1 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c insertion loss (db) frequency (ghz)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 195 typical supply current vs. vdd vdd (v) idd (ma) +2.4 9 +2.7 12 +3.0 16 +4.5 33 +5.0 39 +5.5 44 drain bias voltage (vdd) +8 v rf input power (rfin) (vdd = +5.0 vdc) lna mode bypass mode +15 dbm +30 dbm channel temperature 150 c continuous pdiss (t = 85 c) (derate 13 mw/c above 85 c) 850 mw thermal resistance (channel to ground paddle) 76.9 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a absolute maximum ratings hmc593lp3 / 593lp3e v03.0309 gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz bypass mode, psat vs. temperature -5 -4 -3 -2 -1 0 3.3 3.4 3.5 3.6 3.7 3.8 +25c +85c -40c insertion loss (db) frequency (ghz) outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. part number package body material lead finish msl rating package marking [3] hmc593lp3 low stress injection molded plastic sn/pb solder msl1 [1] 593 xxxx hmc593lp3e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] 593 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 196 pin descriptions pin number function description interface schematic 1, 2, 5, 6, 8, 9, 11 - 13 n/c no connection necessary. these pins may be connected to rf/dc ground. 3rfin this pin is ac coupled and matched to 50 ohms. 4, 7, 15 gnd these pins must be connected to rf/dc ground. 10 rfout this pin is ac coupled and matched to 50 ohms. 14 vdd power supply voltage. bypass capacitors are required. see application circuit. 16 vctl lna/bypass mode control voltage. see truth table. application circuit component value c1, c2 100pf c3 10kpf hmc593lp3 / 593lp3e v03.0309 gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz lna mode vctl= vdd bypass mode vctl= 0v truth table electrostatic sensitive device observe handling precautions
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 197 hmc593lp3 / 593lp3e v03.0309 gaas phemt mmic low noise amplifier w/ bypass mode, 3.3 - 3.8 ghz item description j1 - j2 pcb mount sma rf connector j3 - j6 dc pin c1, c2 100 pf capacitor, 0402 pkg. c3 10 kpf capacitor, 0402 pkg. u1 hmc593lp3 / hmc593lp3e amplifi er pcb [2] 117158 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 or arlon 25fr evaluation pcb the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 117160 [1]
|
